WF230 Commercial Range

The Manrose range of 230mm (9") extractor fans is suitable for window or wall mounting and cover a wide variety of domestic and commercial applications including kitchens, utility rooms, pubs, restaurants, offices, shops and factories.
 
Incorporating the latest technology and design these high performance extractor fans are easy to install and are attractively styled in high gloss ABS thermoplastics for durability and ease of cleaning.
 
There are three models in this range. The basic model with fixed louvres, the manual model with internal pullcord operated backdraught shutters, and the automatic model with thermo-activated internal shutters which open automatically when the fan is switched on.
  • Extract rate 500m³hr, 138 litres per second.
     
  • Fans can be wall or window mounted
     
  • British made
     
  • Tested to comply with HD280/BS3456 Part 102:342 1988
     
  • 2 year no quibble guarantee
     
  • Full back up range of ventilation accessories

230MM (9")Range of Extractor Fans
WF230 Series
  • The WF230 Series basic model has fixed louvres and comes with or without pullcord switch. This unit will also provide a natural source of trickle flow ventilation when the fan is switched off.
See Technical Data
 
WF230M Series
  • The manual models have pullcord operated internal backdraught shutters, which also start the fan motor unit.
     
    Variable speed option is also available on the WF230 basic and manual versions using our fan speed controller. Catalogue No. 1350.
See Technical Data
 
WF230A Series
  • The automatic versions have thermo-activated shutters which open silently approximately 45 seconds after the fan has been switched on.
     
    Reversible speed controllers are available for the WF230A.
    Cat No. 1348 - 2 speed reversible controller
    Cat No. 1349 - variable reversible controller
     
  • The WF230 Series is designed for window fitting through a standard 260mm ø hole and can also be wall mounted using our wall fixing kit Catalogue No. 1301.
     
  • The WF230 Series is supplied pre-wired with 1.5m of 2 core cable and all models come complete with window gasket.
     
    On the WF230A Series, if reversible/variable or two speed control is used, a five core cable will be required (available separately), enabling the fan to intake or extract at variable speeds. NOTE: Do not use standard variable speed control on automatic range. (Cat No. 1350.)
See Technical Data

 
Technical Data
 
Window/Wall Models 230mm (9")
Catalogue No. Type
WF230 Standard model with fixed grilles.
WF230P Pullcord model as above but with pullcord switch.
WF230MP Manual model with internal manual shutters.
WF230A Automatic model with internal thermo-activated shutters.

 
Construction
 
These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.
 
Electrical
 
220-240V ~ A.C. 50Hz ns. Single phase consuming 60 watts on the 230 Series and 80 watts on the 230A Series. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan must not be accessible to a person using either the shower or the bath and mounted a minimum of 1.8 metres from the floor.
 
Motor
 
4 pole single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal auto resetting cut-out. Totally enclosed for protection against dust and dirt. Motors are continually rated.
 
Guarantee
 
Two year no quibble guarantee.
 
Installation
 
WF230 Series. These fans are designed to be fitted in a window through a standard 260mm ø hole. A wall fixing kit catalogue No. 1301 is also available for through wall mounting which comprises of wall plugs, screws and a 400mm length of 9" diameter aluminum flexible ducting (when extended).
 
Performance
 
WF230 M and A Series extract rate 500m³hr, 138 litres per second.
 
Packaging
 
WF230 Series in outer carton of 1 measuring 301mm x 156mm x 345mm. Weight 3.5 kgs. Also available in outer carton of 5 measuring 780mm x 301mm x 345mm. Weight 17.5 kgs.
 
Additional Data
 
WF230A Maximum pressure: 60 p.a. Fan speed: 1600 r.p.m. Sound volume: 60.0 dB(A).
 
WF230/M Maximum pressure: 50 p.a. Fan speed: 1250 r.p.m. Sound volume: 50.0 dB(A).
 
Maximum operating temperature 400C.
 
Back to the top
1 Albion Close, Slough, Berkshire, SL2 5DT
Tel: 01753 691399, Fax: 01753 692294, email: sales@manrose.com